At 1-1/2 inch, Wilden makes three clamped stainless pumps. Together they account for 116 builds, which makes this one of the busiest sizes in the stainless range. Here are three representative part numbers side by side.
P4 (04-12828)
XPS4 (04-12914)
PS4 (04-13250)
Air system
Pro-Flo
Pro-Flo SHIFT
Pro-Flo SHIFT
Air side
Polypropylene
Aluminum
Polypropylene
Diaphragm
Santoprene
Santoprene
PTFE
Max flow
81 gpm (307 L/min)
83 gpm (314 L/min)
99 gpm (375 L/min)
Dry suction lift
17 ft (5.2 m)
23.3 ft (7.1 m)
22.9 ft (7.0 m)
Temperature
32 to 175 °F (0 to 79 °C)
-40 to 225 °F (-40 to 107 °C)
40 to 175 °F (4 to 79 °C)
Shipping weight
53 lb (24 kg)
62 lb (28 kg)
62 lb (28 kg)
Stainless builds
54
53
9
What the table tells a buyer
The PS4 has the highest listed flow of the three, even with a PTFE diaphragm. It is also the smallest group, with nine builds.
The XPS4 has the widest temperature range because of its aluminum air side, and the best dry suction lift on the pages we checked.
The P4 is the lightest and is often the pump already installed. For a direct swap, matching the model is usually simpler than changing to another family.
Tri-Clamp ports are common here: 22 P4, 28 XPS4 and 3 PS4 builds. The Tri-Clamp version of the same pump adds a few pounds, for example 56.6 lb (26 kg) for P4 build 04-13796.
PSG does not list a maximum solids size on these P4, XPS4 and PS4 pages, so we will not quote one. If your liquid carries particles, send us a description and we will check it against Wilden’s data for that build.
Example builds
Part No.
Build code
Elastomer
Connection
04-10520
P4/SSAPP/TEU/TF/STF/0070
PTFE
Tri-Clamp
04-13796
P4/SSAPP/FWS/FW/FW/0070
Santoprene
Tri-Clamp
04-13765
P4/SSAPP/ZSS/FS/FS
Hytrel
Threaded
04-12193
P4/SSAPP/VTS/NE/NE
FKM
Threaded
04-6959
P4/SSAPP/EPS/EP/EP
EPDM
Threaded
04-11694
P4/SSAPP/NES/BN/BN
Neoprene
Threaded
04-10283
P4/SSAPP/BNS/BN/BN
Buna-N
Threaded
04-13252
PS4/SSSPP/ZGS/BN/BN
Bunalast
Threaded
All 116 stainless P4, XPS4 and PS4 builds: P4 | XPS4 | PS4
Genuine WILDEN H800, XH800 and XHS430S stainless steel high pressure diaphragm pumps: discharge pressure above the air supply, 2″ and 1-1/2″ flanged, 8 builds.
H800 / XH800: up to 95 gpm / 360 L/min (21.6 m³/h)
Flow Rate (m³/h)
Max air pressure 85 psi / 5.9 bar (H800, XH800); discharge pressure above air pressure
Head (m)
Compressed air, max 5.9 bar (85 psi) for H800 and XH800