Handling Abrasive GlazesCeramic glazes contain fine abrasive particles that wear out conventional pumps quickly. The QBY diaphragm pump handles them with minimal wear because the diaphragms move slowl…
| Flow Rate | 0-30m³/h |
|---|---|
| Head | 0 – 50 / 70m |
| Power | —kW |
| Inlet / Outlet Diameter | 10 – 100mm |
| Material | PP Engineering Plastic, Aluminum Alloy, Cast Iron, Stainless Steel |
Handling Abrasive Glazes
Ceramic glazes contain fine abrasive particles that wear out conventional pumps quickly. The QBY diaphragm pump handles them with minimal wear because the diaphragms move slowly and the valves are simple.
Ceramic Industry Uses
Why It Works
The large ball valves pass solids without clogging. The diaphragms isolate the abrasive fluid from the drive mechanism. Cast iron construction resists wear.
Care Tips
Rinse the pump after each shift to prevent glaze from drying inside. Check diaphragms weekly for abrasion wear.
Applications Summary:
glaze transfer, clay slip pumping, engobe application, waste slurry removal, ball mill discharge, ceramic manufacturing
Thanks for reading from HAQUANPUMP. We supply QBY diaphragm pumps for the ceramic industry. Ask about abrasion-resistant options.
QBY AODD PumpThe Full QBY FamilyThe QBY series covers eight standard sizes from 10 mm to 100 mm. Flow ranges from 0.8 m³/h to 30 m³/h. Head goes up to 60 meters. There’s a model for almost every job. Complete Mode…
QBY AODD PumpWhen You Need Big FlowThe QBY-80 and QBY-100 are the largest standard models. They handle high-volume transfer jobs where smaller pumps would struggle. Both models share the same robust design princip…
QBY AODD PumpChoosing the Right Body MaterialThe QBY comes in four standard materials. Each has strengths for different applications. Here’s a quick comparison. Material Comparison Table Material Weight Corrosion…