Glaze and clay slurries are abrasive, heavy and quick to settle — hard on any pump with tight clearances or a shaft seal. The QBY has neither. It passes the solids, wears slowly, and self-primes from…
| Flow Rate | 0-30m³/h |
|---|---|
| Head | 0 – 50 / 70m |
| Inlet / Outlet Diameter | 10 – 100mm |
| Material | PP Engineering Plastic, Aluminum Alloy, Cast Iron, Stainless Steel |
Glaze and clay slurries are abrasive, heavy and quick to settle — hard on any pump with tight clearances or a shaft seal. The QBY has neither. It passes the solids, wears slowly, and self-primes from a settled tank, which is why it is a fixture in tile, porcelain and pottery production.
Stepless air control lets operators dial the flow for even glaze application, and because the pump stalls harmlessly against a closed nozzle, it suits intermittent spraying and pouring without a bypass.
Applications: ceramic glaze, clay slurry, porcelain and tiles, brick and pottery, enamel, mineral suspensions, abrasive slurry
Have a corrosive, abrasive or hard-to-handle fluid to move? The HAQUANPUMP engineering team will help you specify the right QBY pump — reach out any time for advice or a quotation.
QBY Air-Operated Diaphragm Pump (AODD)The QBYS is the stainless-steel version of the QBY pneumatic diaphragm pump — SS304/SS316 for corrosive, food and hygienic fluids. Full size range, in stock.
QBY Air-Operated Diaphragm Pump (AODD)The Full QBY FamilyThe QBY series covers eight standard sizes from 10 mm to 100 mm. Flow ranges from 0.8 m³/h to 30 m³/h. Head goes up to 60 meters. There’s a model for almost every job. Complete Mode…
QBY Air-Operated Diaphragm Pump (AODD)When You Need Big FlowThe QBY-80 and QBY-100 are the largest standard models. They handle high-volume transfer jobs where smaller pumps would struggle. Both models share the same robust design princip…
