Model: QBY-50
Once flow and solids climb beyond what a 1.5-inch pump handles comfortably, the QBY-50’s 2-inch body takes over. It moves up to 12 m³/h and passes solids to 8 mm, making it a workhorse for slurry, slu…
| Flow Rate | 0-30m³/h |
|---|---|
| Head | 0 – 50 / 70m |
| Power | —kW |
| Inlet / Outlet Diameter | 10 – 100mm |
| Material | PP Engineering Plastic, Aluminum Alloy, Cast Iron, Stainless Steel |
Once flow and solids climb beyond what a 1.5-inch pump handles comfortably, the QBY-50’s 2-inch body takes over. It moves up to 12 m³/h and passes solids to 8 mm, making it a workhorse for slurry, sludge and thicker process fluids.
| Port size | 50 mm (2 in) |
| Max flow | 12 m³/h |
| Max head | 60 m |
| Suction lift | 7 m |
| Max particle | 8 mm |
| Air consumption | 0.9 m³/min (≤7 bar) |
With no shaft seal and no close-fitting parts, abrasive media wear the pump only slowly, and there is nothing to leak — a real advantage when the fluid is toxic or corrosive.
Applications: wastewater and sludge, mining slurry, ceramics, chemical processing, cement grout, paint, petrochemical
Thank you for visiting HAQUANPUMP, a professional sewage pump manufacturer. For QBY diaphragm pump selection, pricing or a datasheet, contact our engineers — we usually reply within 24 hours.
QBY AODD PumpThe Full QBY FamilyThe QBY series covers eight standard sizes from 10 mm to 100 mm. Flow ranges from 0.8 m³/h to 30 m³/h. Head goes up to 60 meters. There’s a model for almost every job. Complete Mode…
QBY AODD PumpWhen You Need Big FlowThe QBY-80 and QBY-100 are the largest standard models. They handle high-volume transfer jobs where smaller pumps would struggle. Both models share the same robust design princip…
QBY AODD PumpChoosing the Right Body MaterialThe QBY comes in four standard materials. Each has strengths for different applications. Here’s a quick comparison. Material Comparison Table Material Weight Corrosion…