Model: QBY-40
The QBY-40 is the model most buyers reach for first — a 1.5-inch all-rounder that covers the bulk of everyday transfer duties at up to 8 m³/h. It carries solids to 4.5 mm and lifts 7 m dry, so it cope…
| Flow Rate | 0-30m³/h |
|---|---|
| Head | 0 – 50 / 70m |
| Power | —kW |
| Inlet / Outlet Diameter | 10 – 100mm |
| Material | PP Engineering Plastic, Aluminum Alloy, Cast Iron, Stainless Steel |
The QBY-40 is the model most buyers reach for first — a 1.5-inch all-rounder that covers the bulk of everyday transfer duties at up to 8 m³/h. It carries solids to 4.5 mm and lifts 7 m dry, so it copes with everything from clean chemicals to lightly laden slurries.
| Port size | 40 mm (1.5 in) |
| Max flow | 8 m³/h |
| Max head | 60 m |
| Suction lift | 7 m |
| Max particle | 4.5 mm |
| Air consumption | 0.6 m³/min (≤7 bar) |
If you are unsure which size to standardise on across a site, the QBY-40 is usually the safe starting point: common spares, wide material choice, and enough head and solids capacity for most lines.
Applications: chemical processing, paint and coatings, ceramics, adhesives, food and beverage, wastewater, light mining slurry
Have a corrosive, abrasive or hard-to-handle fluid to move? The HAQUANPUMP engineering team will help you specify the right QBY pump — reach out any time for advice or a quotation.
QBY AODD PumpThe Full QBY FamilyThe QBY series covers eight standard sizes from 10 mm to 100 mm. Flow ranges from 0.8 m³/h to 30 m³/h. Head goes up to 60 meters. There’s a model for almost every job. Complete Mode…
QBY AODD PumpWhen You Need Big FlowThe QBY-80 and QBY-100 are the largest standard models. They handle high-volume transfer jobs where smaller pumps would struggle. Both models share the same robust design princip…
QBY AODD PumpChoosing the Right Body MaterialThe QBY comes in four standard materials. Each has strengths for different applications. Here’s a quick comparison. Material Comparison Table Material Weight Corrosion…