Model: QBY-100
The QBY-100 tops the range. Its 4-inch port pushes up to 30 m³/h and handles solids to 10 mm, making it the choice for bulk transfer and heavy dewatering where you want a single pump to do the work of…
| Flow Rate | 0-30m³/h |
|---|---|
| Head | 0 – 50 / 70m |
| Power | —kW |
| Inlet / Outlet Diameter | 10 – 100mm |
| Material | PP Engineering Plastic, Aluminum Alloy, Cast Iron, Stainless Steel |
The QBY-100 tops the range. Its 4-inch port pushes up to 30 m³/h and handles solids to 10 mm, making it the choice for bulk transfer and heavy dewatering where you want a single pump to do the work of several smaller ones.
| Port size | 100 mm (4 in) |
| Max flow | 30 m³/h |
| Max head | 60 m |
| Suction lift | 7 m |
| Max particle | 10 mm |
| Air consumption | 1.5 m³/min (≤7 bar) |
Like every QBY, it needs no foundation and no electricity — just a compressed-air line — so it is quick to deploy on a new line or move to wherever the next job is.
Applications: high-volume wastewater, mining and tailings, dewatering, bulk chemical transfer, cement grout, petrochemical, marine
Have a corrosive, abrasive or hard-to-handle fluid to move? The HAQUANPUMP engineering team will help you specify the right QBY pump — reach out any time for advice or a quotation.
QBY AODD PumpThe Full QBY FamilyThe QBY series covers eight standard sizes from 10 mm to 100 mm. Flow ranges from 0.8 m³/h to 30 m³/h. Head goes up to 60 meters. There’s a model for almost every job. Complete Mode…
QBY AODD PumpWhen You Need Big FlowThe QBY-80 and QBY-100 are the largest standard models. They handle high-volume transfer jobs where smaller pumps would struggle. Both models share the same robust design princip…
QBY AODD PumpChoosing the Right Body MaterialThe QBY comes in four standard materials. Each has strengths for different applications. Here’s a quick comparison. Material Comparison Table Material Weight Corrosion…