（1）Daily InspectionAssign special staff to check pump circuit, motor operating current and noise every shift. Rotate pump shaft before startup to exclude stuck foreign matters, recheck coupling concen…
| Flow Rate | 2 ~ 2000m³/h |
|---|---|
| Head | 3 ~ 60m |
| Power | 0.75 ~ 250kW |
| Inlet / Outlet Diameter | 25-400mm |
| Material | Cast Iron,SS304,SS316 |
Not sure this pump fits your duty? Try the pump selector
（1）Daily Inspection
Assign special staff to check pump circuit, motor operating current and noise every shift. Rotate pump shaft before startup to exclude stuck foreign matters, recheck coupling concentricity regularly.
（2）Post-use Flushing
After conveying viscous sludge or fiber wastewater, run pump in clean water for several minutes to discharge residual sediment inside flow channel, avoid impeller blockage caused by dirt accumulation.
（3）Mechanical Seal Lubrication
Refill or replace 10#-30# engine oil in oil chamber every 300~500 working hours, maintain sufficient lubrication for tungsten carbide mechanical seal, reduce friction abrasion.
（4）Wearing Parts Replacement
Inspect sealing ring regularly; once worn leading to pump efficiency drop, replace sealing ring immediately. Check impeller balance and shaft wear quarterly.
（5）Long-term Shutdown Storage
Completely disassemble pump when stopping operation over 1 month, clean internal sediment with clean water, inspect mechanical seal and impeller, reassemble and store in dry environment.
（6）Operation Restriction
Prohibit continuous operation under head lower than 60% rated head to avoid motor overload burnout. Full-automatic control cabinet must be matched for power protection.
Need More Information?
If you need more technical information about YW Type Liquid-Submerged Sewage Pump or have any questions regarding installation, operation, maintenance and model selection, please feel free to contact the engineering and technical team of Haquan Pump & Valve. We will provide you with professional and thoughtful service wholeheartedly. Your full satisfaction is our top priority.
YW Series Vertical Submerged Sewage Pump400YW1700-22-160 vertical sump pump: DN400, 1700 m³/h at 22 m, 160 kW, 82.1% efficiency. For main municipal pumping stations and large drainage.
YW Series Vertical Submerged Sewage Pump300YW800-20-75 vertical sump pump: DN300, 800 m³/h at 20 m, 75 kW, 980 r/min. For stormwater stations and flood drainage, plus the mounting height rule.
YW Series Vertical Submerged Sewage Pump200YW400-13-30 vertical sump pump: DN200, 400 m³/h at 13 m, 30 kW. High flow, low head transfer for inlet pits and tanks in wastewater treatment plants.
