Model: WQ/QW
150mm WQ/QW submersible sewage pumps, 145-180m³/h, GAK-150 coupling. Municipal-grade lift stations, plus a heavy fibrous-waste grinder version.
| Flow Rate | 145-180m³/h |
|---|---|
| Head | 9-25m |
| Power | 7.5-22kW |
| Inlet / Outlet Diameter | DN150 |
| Material | Cast Iron,SS304，SS316L |
150mm is the point where these stop being “big pumps” and start being municipal infrastructure in the ordinary sense of the term.
| Model | Flow (m³/h) | Head (m) | Power (kW) | Notes |
| WQ-150-145-9 | 145 | 9 | 7.5 | Low-head entry point |
| QW-150-180-15 | 180 | 15 | 15 | Standard municipal spec |
| WQ-150-180-20 | 180 | 20 | 18.5 | Same flow, more lift |
| WQ-150-180-25 | 180 | 25 | 22 | Long-distance transfer |
| WQ-G-150-150-20 | 150 | 20 | 18.5 | Grinder, large slaughter-house scale |
Nobody’s climbing into a pit handling this volume for a routine check, so auto-coupling is standard practice rather than an add-on. One thing people skip and shouldn’t: install a check-valve on the discharge line. At 145-180 m³/h, a missing check-valve means a sharp reverse-rotation event every time the pump shuts down, and that adds up to real impeller wear over enough cycles.
Submersible Sewage Pumps300mm WQ submersible sewage pumps, 480-1100m³/h across eight variants, GAK-300 coupling, for large municipal and metropolitan sump stations.
Submersible Sewage Pumps250mm WQ submersible sewage pumps, all rated 600m³/h across five head/power combinations, for large municipal and industrial sump stations.
Submersible Sewage Pumps200mm WQ/QW submersible sewage pumps, 250-400m³/h across nine variants, GAK-200 coupling, for municipal and industrial-park lift stations.
