
ZW40-10-20 Self-Priming Sewage Pump with DN40 Suction
ZW40-10-20: 10 m³/h at 20 m, 2.2 kW. Why the suction is DN40 and the discharge DN32, and how to plan the pipework.

Model: ZW32-10-20
ZW32-10-20: 10 m³/h at 20 m, 2.2 kW, DN32 flanges. How it compares with the other 2.2 kW ZW pumps on the same base.
| Flow Rate | 10m³/h |
|---|---|
| Head | 20m |
| Power | 2.2kW |
| Inlet / Outlet Diameter | 32 / 32mm |
| Material | Cast iron (standard); stainless steel on request |
Not sure this pump fits your duty? Try the pump selector
Seven ZW models share the same 2.2 kW motor and the same 850 mm base. They differ in flow, head and port size. ZW32-10-20 sits in the middle: 10 m³/h at 20 m through DN32 flanges.
| Model | Flow (m³/h) | Head (m) | Power (kW) | Speed (r/min) | Inlet / outlet (mm) |
|---|---|---|---|---|---|
| ZW25-8-15 | 8 | 15 | 2.2 | 2900 | 25 / 25 |
| ZW32-5-20 | 5 | 20 | 2.2 | 2900 | 32 / 32 |
| ZW32-10-20 | 10 | 20 | 2.2 | 2900 | 32 / 32 |
| ZW40-10-20 | 10 | 20 | 2.2 | 2900 | 40 / 32 |
| ZW40-20-15 | 20 | 15 | 2.2 | 2900 | 40 / 32 |
| ZW50-10-20 | 10 | 20 | 2.2 | 2900 | 50 / 40 |
| ZW50-20-12 | 20 | 12 | 2.2 | 2900 | 50 / 40 |
Notice that ZW32-10-20, ZW40-10-20 and ZW50-10-20 have the same rated duty. The difference is the suction size. Choose the one that matches your existing pipework, or the larger inlet if the liquid carries bigger solids, since the passage size follows the port.
If your duty needs more head than 20 m at this flow, step up to the 3 kW models such as ZW32-9-30.
| Item | ZW32-10-20 |
|---|---|
| Flow | 10 m³/h |
| Head | 20 m |
| Motor power | 2.2 kW |
| Speed | 2900 r/min |
| Efficiency | 45 % |
| NPSHr | 2.5 m |
| Self-priming height | 5.5 m |
| Self-priming time | 3 min per 5 m |
| Suction / discharge | DN32 / DN32 |
| Weight | 100 kg |
The pump, coupling and motor are mounted on a common base. L is the overall length; L1 to L4 are base lengths; a and f locate the outlet; B1 and B2 are the base widths; H is the shaft centre height; h1 and h2 are the heights of the suction and discharge flanges; h3 is the base thickness.
| L | L1 | L2 | L3 | L4 | a | f | B1 | B2 | H | h1 | h2 | h3 | Base bolts | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZW32-10-20 | 850 | 680 | 115 | 450 | 240 | 255 | 510 | 310 | 370 | 228 | 410 | 625 | 24 | 4ר18 |
| Flange | DN | Outer dia. D | Bolt circle | Raised face | Thickness b | Face height f | Bolts n×d |
|---|---|---|---|---|---|---|---|
| Suction | 32 | 120 | 90 | 70 | 14 | 2 | 4ר14 |
| Discharge | 32 | 120 | 90 | 70 | 14 | 2 | 4ר14 |

ZW40-10-20: 10 m³/h at 20 m, 2.2 kW. Why the suction is DN40 and the discharge DN32, and how to plan the pipework.

ZW32-9-30 lifts 9 m³/h to 30 m on 3 kW with DN32 flanges. A worked example of checking suction lift before you buy.

ZW32-5-20: 5 m³/h at 20 m, 2.2 kW, DN32. What each part of a ZW model name means, including the P and B suffixes.