Genuine Wilden AODD pumps for wastewater and sludge — passes solids, runs dry safe, portable and sealless. From an authorized dealer, in stock.
| Flow Rate | up to ~1040 L/min (275 gpm) |
|---|---|
| Head | up to 86 m (8.6 bar / 125 psi) |
| Inlet / Outlet Diameter | 1-inch–3-inch (25–76 mm) |
| Material | cast iron, stainless steel |
Wastewater is unglamorous but unforgiving: full of solids, abrasive, and the pump often has to sit in a pit and run dry the second the level drops. That combination kills a lot of pumps — and it’s precisely where an air-operated diaphragm pump is at home.
It passes solids that would clog an impeller, it doesn’t mind running dry, and with no electric motor it’s safe and simple to drop into a wet, awkward spot. Cast iron or stainless bodies take the abrasion; the sealless design means there’s no seal for the grit to blast its way through.
We supply genuine Wilden pumps for effluent, sludge and general dirty-water transfer, common builds in stock. Tell us the solids and the flow and we’ll size it.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsWilden XPS830/AAAAA/VTS/VT/VT (part 08-14814): a 2″ aluminum AODD pump with Viton wetted parts, rated to 181 GPM. Specs, materials and what it’s built for.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsWilden P220/AAPPP/TSU/TF/ATF/0695 (part 02-11372): 1″ aluminum AODD pump, PTFE diaphragm, rated to 44 GPM max — useful even for low-GPM duty points.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsWilden XPS830/AAAAA/VTS/VT/VT is a 2-inch aluminum AODD pump with Viton wetted components, designed for reliable industrial fluid transfer and demanding chemical applications.
