Cast iron WILDEN pumps are used for abrasive slurries, sludge and dirty water where a heavy, tough casing makes sense. Wilden lists 356 cast iron builds, from 1 inch up to 4 inch. Cast iron models and…
| Flow Rate | Up to 1049 L/min (277 gpm) on the largest 4" models; depends on model and size |
|---|---|
| Head | Up to 86 m (8.6 bar / 125 psi), depending on air pressure |
| Inlet / Outlet Diameter | 1/4" to 4" (6 to 102 mm), depending on model |
| Material | Aluminum Alloy, Cast Iron, SS316 Stainless Steel, Hastelloy, PP, PVDF, Carbon Filled Acetal |
Cast iron WILDEN pumps are used for abrasive slurries, sludge and dirty water where a heavy, tough casing makes sense. Wilden lists 356 cast iron builds, from 1 inch up to 4 inch.
| Model | Port | Max flow | Shipping weight |
|---|---|---|---|
| P4 (04-0127) | 1-1/2″ | 76 gpm (288 L/min) | 51 lb (23 kg) |
| P8 (08-0128) | 2″ | 165 gpm (625 L/min) | 112 lb (51 kg) |
| XPS8 (08-16054) | 2″ | 190 gpm (719 L/min) | 122 lb (55 kg) |
| T15 (15-10269) | 3″ | 232 gpm (878 L/min) | 200 lb (91 kg) |
| XPS20 (20-10088) | 4″ | 277 gpm (1049 L/min) | 530 lb (240 kg) |
Cast iron is not suitable for acids. For abrasive and corrosive liquids together, stainless steel is usually the compromise. Find all cast iron builds in our iron pump lookup.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsA real enquiry for 1″ WILDEN parts, line by line: PTFE diaphragm, Hytrel back-up, PTFE balls, stainless seats, shaft, outer piston, pilot sleeve and air valve.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsSpare parts for 4″ WILDEN T20, PS20 and XPS20 iron pumps: what is listed under 20- numbers, and which 3″ air kits the 4″ pumps share.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsSpare parts for bolted 3″ WILDEN pumps: P1500, PS1500, PX1500, the FIT P1520 and P1530, and H1500. Wet end kits, PTFE diaphragms, balls, manifolds and air kits.
