Wilden AODD Pump – Size Range 1/4″ to 4″, 19 to 1049 L/min, Complete Selection Guide
WILDEN builds air-operated diaphragm pumps in seven port sizes, from 1/4 inch to 4 inch. Wilden lists 2,476 builds across them. This guide sets out the sizes, the main models and how to narrow the cho…
Specifications
Flow Rate
Up to 1049 L/min (277 gpm) on the largest 4" models; depends on model and size
Head
Up to 86 m (8.6 bar / 125 psi), depending on air pressure
WILDEN builds air-operated diaphragm pumps in seven port sizes, from 1/4 inch to 4 inch. Wilden lists 2,476 builds across them. This guide sets out the sizes, the main models and how to narrow the choice.
Sizes and flows
Port size
Example models
Max flow (example build)
Max solids (where published)
1/4″
P.025, PS25
5 to 5.7 gpm (19 to 22 L/min)
0.02 to 0.06 in (0.5 to 1.5 mm)
1/2″
P1, XPS1, P100
14.8 to 15.9 gpm (56 to 60 L/min)
0.06 in (1.5 mm)
1″
P2, P220, XPS220, P200
44 to 58 gpm (167 to 220 L/min)
0.13 to 0.25 in (3.3 to 6.4 mm)
1-1/2″
P4, XPS4, XPS420, P400
76 to 132 gpm (288 to 500 L/min)
Up to 0.25 in (6.4 mm)
2″
P8, XPS8, T8, P800
141 to 190 gpm (534 to 719 L/min)
Up to 0.25 in (6.4 mm)
3″
T15, XPS1520, P1500
195 to 271 gpm (738 to 1026 L/min)
Up to 0.25 in (6.4 mm)
4″
T20, XPS20, PS20
274 to 277 gpm (1037 to 1049 L/min)
Not published
Materials
Builds are available in aluminum, stainless steel, cast iron, polypropylene and PVDF, though not every material in every size. The 4 inch pumps, for example, are cast iron, and the plastic pumps stop at 3 inch.
How to choose
Start with the flow at your real discharge pressure, not the maximum flow
Pick the body material for the liquid, then the diaphragm
Check solids size and suction lift against the model
Decide clamped or bolted, threaded or flanged, to suit the pipework
Genuine spare parts are available for current models; search them in our spare parts lookup.
A real enquiry for 1″ WILDEN parts, line by line: PTFE diaphragm, Hytrel back-up, PTFE balls, stainless seats, shaft, outer piston, pilot sleeve and air valve.
Spare parts for bolted 3″ WILDEN pumps: P1500, PS1500, PX1500, the FIT P1520 and P1530, and H1500. Wet end kits, PTFE diaphragms, balls, manifolds and air kits.