Model: WQ/QW
Industrial wastewater needs dependable solids handling. See how non-clogging submersible pumps support factories, process plants and drainage systems.
| Flow Rate | 7-2650m³/h |
|---|---|
| Head | 7 – 60m |
| Power | 0.55-250kW |
| Inlet / Outlet Diameter | 25-500mm |
| Material | Cast Iron,SS304，SS316L |
Industrial wastewater is rarely uniform. One factory may produce relatively light wastewater, while another may discharge water containing fibers, solids or heavier suspended material. This is why pump selection should begin with the actual liquid and duty point rather than with a pump name alone.
The WQ/QW non-clogging submersible sewage pump described in the supplied material is designed for wastewater containing solids and long fibers. Its single-channel or twin-channel impeller provides an open flow path intended to reduce blockage and wrapping. The source information specifically identifies applications in chemical, petroleum, pharmaceutical, mining, paper, food and power-related industries.
In industrial service, the mechanical seal deserves attention. The referenced design uses double mechanical sealing and hard, corrosion-resistant tungsten carbide material. The oil chamber between the pump and motor also provides a protected area for the seal arrangement. A leakage sensor in the oil chamber can signal a sealing problem before it develops into a larger motor issue.
Temperature and liquid characteristics should be checked carefully. The source material gives different operating-condition ranges in different sections, including a general temperature limit of 40°C and a broader product description reaching 60°C for certain stainless-steel configurations. Because the allowable condition depends on the selected construction, buyers should confirm the actual model datasheet rather than applying one temperature figure to every pump.
Installation conditions also influence the choice. A fixed guide-rail coupling system is useful for permanent industrial pumping stations, while a mobile installation can be convenient for temporary drainage and maintenance. Where dry-running conditions are a concern, some configurations can use a water-jacket external circulation cooling arrangement, subject to the selected motor design.
For export projects, 415 V, 50 Hz electrical supply can be specified as a customization requirement. The motor power must still be matched to the required flow and head. Providing the manufacturer with the complete duty point, liquid description, solids information and installation method will normally produce a more useful quotation than requesting only a motor size.
None of this replaces knowing what is actually in the wastewater. Once the solids, temperature and chemical profile are on paper, matching a pump to them becomes a fairly ordinary selection exercise.
Submersible Sewage PumpsMining drainage can contain solids and abrasive material. Learn how non-clogging submersible sewage pumps can be considered for mine wastewater duties.
Submersible Sewage PumpsWQ and QW are common designations for non-clogging submersible sewage pumps. Learn the practical difference in installation and selection.
Submersible Sewage PumpsHospitals and hotels need dependable wastewater drainage. Learn how non-clogging submersible sewage pumps support lift stations and underground drainage.
