QDX6-14-0.55S Stainless Submersible Pump with 40 mm Outlet

QDX6-14-0.55S is the low-head choice at 6 m³/h: 14 m of head from a 0.55 kW single-phase motor, through a 40 mm outlet. Before you order, run through these points with us.

1. Total head. Add the lift from the water level to the discharge point and the pipe losses. If the result is over 14 m, look at QDX6-18-0.75S or QDX6-24-1.1S instead.
2. Power supply. This model needs 220 V single-phase. On 380 V, choose QX6-14-0.55S.
3. Liquid. Solid particles must be 0.2 mm or smaller and no more than 0.1 % by volume. Water with sand, mud or rags needs a submersible sewage pump instead.
4. Temperature and pH. Up to 60 °C. pH 4 to 10 in 304 stainless, or 2 to 13 in 316.
5. Depth. No deeper than 5 m below the surface.
6. Hose or pipe size. The outlet is 40 mm, so plan the discharge line from that.

If every point fits, the pump will do its job. If one does not, tell us which, and we will suggest the model that does.