Model: 50GNWQ12-10-1.1
The 50GNWQ12-10-1.1 is a 1.1 kW cutter sewage pump for restaurants and commercial kitchens — it shreds the rags, gloves and food waste that block ordinary kitchen drain pumps. Available in 220 V.
| Flow Rate | 12m³/h |
|---|---|
| Head | 10m |
| Power | 1.1kW |
| Inlet / Outlet Diameter | 50mm |
| Material | Cast Iron,SS304 |
Not sure this pump fits your duty? Try the pump selector
A commercial kitchen sends things down the floor drain that no one wants to think about: cloth, gloves, packaging, congealed grease, and food scraps by the bucket. A plain sump pump in that pit clogs constantly, and someone ends up fishing it out by hand during service.
The 50GNWQ12-10-1.1 is a small pump built to stop that. It runs 12 m³/h at 10 m head on just 1.1 kW through a 50 mm outlet, and it’s available in single-phase 220 V so it drops into a small premises without special wiring. The 48 HRC alloy cutter shreds the fibrous waste on the way in; the heat-treated 3Cr13 impeller resists the wear that greasy, gritty kitchen effluent causes.
Two things owners usually ask:
Will it cope with grease? — Grease alone isn’t the problem; it’s grease binding rags and packaging into a plug. Shredding those solids is what keeps the pump moving.
Do I need three-phase power? — No. This size is available on ordinary 220 V single-phase supply.
Fitting out a kitchen or small food unit? Contact sales@haquanpump.com.
The 100GNWQ100-25-15S is a precision-cast SS304 cutter sewage pump for chemical plants needing both corrosion resistance and a tall lift — 100 m³/h at 25 m head…
The 150GNWQ150-11-11S is a precision-cast SS304 cutter sewage pump for desalination plants and coastal works — high-volume, low-head handling of brine-laden eff…
The 100GNWQ100-20-11S is a precision-cast SS304 cutter sewage pump for large corrosive process duties — 100 m³/h at 20 m head, combining chemical resistance, vo…
