Model: 65GNWQ20-10-1.5
The 65GNWQ20-10-1.5 is a 1.5 kW, 65 mm cutter sewage pump for laundries and laundromats — its alloy cutter shreds the lint, thread and fabric fluff that blind ordinary pumps.
| Flow Rate | 20m³/h |
|---|---|
| Head | 10m |
| Power | 1.5kW |
| Inlet / Outlet Diameter | 65mm |
| Material | Cast Iron,SS304 |
Laundry wastewater looks harmless — it’s mostly water and detergent. What it hides is lint: an endless stream of fine thread and fabric fluff that a normal pump slowly felts into a solid mat around the impeller until flow stops dead.
The 65GNWQ20-10-1.5 handles that stream differently. Rated at 20 m³/h and 10 m head on 1.5 kW through a 65 mm outlet, it leads with a 48 HRC alloy cutter disc that shears lint and stray fabric into short pieces before they can wrap. The 3Cr13 semi-open impeller behind it is heat-treated for the constant mild abrasion that lint-laden water causes.
Compared with a standard submersible in the same pit, the difference is measured in service calls: a plain pump in a busy laundry can need clearing every few weeks; a cutter pump turns that into a routine yearly check.
Running a laundromat, hotel laundry or uniform-wash operation? Ask us to size it — sales@haquanpump.com.
GNWQ Cutting Submersible Sewage PumpThe 150GNWQ120-10-7.5 moves 120 m³/h at a low 10 m head through a 150 mm outlet — a cutter pump for shifting large volumes of debris-laden water across lagoons, canals and open drains
GNWQ Cutting Submersible Sewage PumpThe 80GNWQ60-16-5.5 is a 5.5 kW, 80 mm cutter sewage pump for malls and food courts — it handles the mix of food waste, packaging and grease that fills commercial-kitchen collection pits. 60 m³/h at 1…
GNWQ Cutting Submersible Sewage PumpThe 100GNWQ60-12-4 is a 4 kW, 100 mm cutter sewage pump for neighbourhood lift stations dealing with today’s wet-wipe-heavy sewage. 60 m³/h at 12 m head.
