Model: 100GNWQ60-12-4
The 100GNWQ60-12-4 is a 4 kW, 100 mm cutter sewage pump for neighbourhood lift stations dealing with today’s wet-wipe-heavy sewage. 60 m³/h at 12 m head.
| Flow Rate | 60m³/h |
|---|---|
| Head | 12m |
| Power | 4kW |
| Inlet / Outlet Diameter | 100mm |
| Material | Cast Iron,SS304 |
Ask any municipal operator what has changed in the last decade and they’ll say the same thing: wet wipes. Marketed as “flushable,” they don’t disintegrate like paper — they knit together into ropes that wrap impellers and block screens. It’s the single biggest cause of lift-station callouts.
The 100GNWQ60-12-4 is a right-sized answer for a neighbourhood or estate lift station: 60 m³/h at 12 m head, 4 kW, 100 mm outlet. Rather than hoping a non-clog impeller can pass a rope of wipes, it shreds them first — the 48 HRC alloy cutter reduces the solids at the inlet, and the 3Cr13 impeller then moves them out without the tangle.
| | Ordinary non-clog pump | 100GNWQ60-12-4 cutter pump |
|—|—|—|
| Wet wipes | Wraps and blocks | Shreds on intake |
| Callout frequency | High | Routine servicing only |
| Impeller wear | Bare cast iron | Heat-treated 3Cr13 |
Upgrading a lift station that keeps choking? Contact sales@haquanpump.com.
GNWQ Cutting Submersible Sewage PumpThe 150GNWQ120-10-7.5 moves 120 m³/h at a low 10 m head through a 150 mm outlet — a cutter pump for shifting large volumes of debris-laden water across lagoons, canals and open drains
GNWQ Cutting Submersible Sewage PumpThe 80GNWQ60-16-5.5 is a 5.5 kW, 80 mm cutter sewage pump for malls and food courts — it handles the mix of food waste, packaging and grease that fills commercial-kitchen collection pits. 60 m³/h at 1…
GNWQ Cutting Submersible Sewage PumpThe 80GNWQ50-18-4 is a 4 kW, 80 mm cutter sewage pump for textile plants and industrial laundries — built to shred the thread, offcuts and fibre that overwhelm mill drains.
