The T2 is a Turbo-Flo pump with 1 inch ports, following Wilden’s size code where 2 means 1 inch. It is not in Wilden’s current range. If you have a T2 in service, there are two routes: find parts for…
| Flow Rate | Not listed in Wilden's current range; contact us for the curve or the current replacement model |
|---|---|
| Head | Up to 86 m (8.6 bar / 125 psi air pressure) |
| Inlet / Outlet Diameter | 1" (25 mm) |
| Material | Aluminum Alloy, Cast Iron, SS316 Stainless Steel, Hastelloy, PP, PVDF, Carbon Filled Acetal |
The T2 is a Turbo-Flo pump with 1 inch ports, following Wilden’s size code where 2 means 1 inch. It is not in Wilden’s current range. If you have a T2 in service, there are two routes: find parts for your build, or move to a current 1 inch pump.
| Model | Type | Max flow (example build) |
|---|---|---|
| P2 | Clamped, Pro-Flo | 45.5 gpm (172 L/min), aluminum |
| P220 | Bolted metal, NPT | 44 gpm (167 L/min), aluminum |
| XPS220 | Bolted, Pro-Flo SHIFT | 52 gpm (197 L/min) |
| P200 | Bolted plastic | 58 gpm (220 L/min), polypropylene |
Which one fits depends on the body material you need and whether the old pump was clamped or bolted into the line.
Before ordering, compare the port positions and footprint with your existing installation. We can help with that if you send photos and the nameplate code.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsA real enquiry for 1″ WILDEN parts, line by line: PTFE diaphragm, Hytrel back-up, PTFE balls, stainless seats, shaft, outer piston, pilot sleeve and air valve.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsSpare parts for 4″ WILDEN T20, PS20 and XPS20 iron pumps: what is listed under 20- numbers, and which 3″ air kits the 4″ pumps share.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsSpare parts for bolted 3″ WILDEN pumps: P1500, PS1500, PX1500, the FIT P1520 and P1530, and H1500. Wet end kits, PTFE diaphragms, balls, manifolds and air kits.
