Wilden makes several pumps with 1/2 inch ports, and they are easy to confuse. Wilden lists four model families at this size. Here is what separates them. Model Construction Body materials Max flow (ex…
| Flow Rate | Up to 59 L/min (15.5 gpm) |
|---|---|
| Head | Up to 86 m (8.6 bar / 125 psi air pressure) |
| Inlet / Outlet Diameter | 1/2" (13 mm) NPT |
| Material | Aluminum, stainless steel, polypropylene or PVDF |
Wilden makes several pumps with 1/2 inch ports, and they are easy to confuse. Wilden lists four model families at this size. Here is what separates them.
| Model | Construction | Body materials | Max flow (example build) |
|---|---|---|---|
| P1 | Clamped, Pro-Flo | Aluminum, stainless steel, polypropylene, PVDF | 15.5 gpm (59 L/min), aluminum |
| XPS1 | Clamped, Pro-Flo SHIFT | Aluminum, stainless steel | 15.9 gpm (60 L/min), aluminum |
| XP1 | Clamped, conductive air side | Stainless steel | 14.4 gpm (55 L/min), PTFE build |
| P100 | Bolted, Pro-Flo | Polypropylene, PVDF | 14.8 gpm (56 L/min), polypropylene |
The flows are close, so the choice usually comes down to material and construction. Metal pumps are clamped. The plastic P100 is bolted, and Wilden lists 89 P100 builds in polypropylene and PVDF for corrosive chemicals. The XPS1 uses the newer Pro-Flo SHIFT air system, which Wilden designed to use less compressed air.
All 1/2 inch builds are listed by part number in our WILDEN lookup.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsA real enquiry for 1″ WILDEN parts, line by line: PTFE diaphragm, Hytrel back-up, PTFE balls, stainless seats, shaft, outer piston, pilot sleeve and air valve.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsSpare parts for 4″ WILDEN T20, PS20 and XPS20 iron pumps: what is listed under 20- numbers, and which 3″ air kits the 4″ pumps share.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsSpare parts for bolted 3″ WILDEN pumps: P1500, PS1500, PX1500, the FIT P1520 and P1530, and H1500. Wet end kits, PTFE diaphragms, balls, manifolds and air kits.
