Model: 80GNWQ35-15-3
The 80GNWQ35-15-3 is a 3 kW, 80 mm cutter sewage pump for basement car parks and podium drains — it clears the rags, debris and wash-down waste that block car-park sump pumps. 35 m³/h at 15 m head
| Flow Rate | 35m³/h |
|---|---|
| Head | 15m |
| Power | 3kW |
| Inlet / Outlet Diameter | 80mm |
| Material | Cast Iron,SS304 |
Not sure this pump fits your duty? Try the pump selector
A basement car park drains a surprising amount of rubbish into its sump: cloth, plastic, cigarette ends, wash-down silt, and whatever blows down the ramp. The sump usually sits at the lowest point of the building, so when its pump clogs, the water has nowhere to go but up into the parking deck.
The 80GNWQ35-15-3 is a solid choice for that sump — 35 m³/h at 15 m head, 3 kW, 80 mm outlet. The 48 HRC alloy cutter deals with the fibrous and plastic debris that a plain sump pump chokes on, and the heat-treated 3Cr13 impeller takes the grit and silt that always come with car-park water.
One habit worth building in: fit a coarse screen on the sump and check the cutter clearance (0.1–0.25 mm) once a year — do that and this pump is close to fit-and-forget. sales@haquanpump.com
The 100GNWQ100-25-15S is a precision-cast SS304 cutter sewage pump for chemical plants needing both corrosion resistance and a tall lift — 100 m³/h at 25 m head…
The 150GNWQ150-11-11S is a precision-cast SS304 cutter sewage pump for desalination plants and coastal works — high-volume, low-head handling of brine-laden eff…
The 100GNWQ100-20-11S is a precision-cast SS304 cutter sewage pump for large corrosive process duties — 100 m³/h at 20 m head, combining chemical resistance, vo…
