Model: 50GNWQ15-20-3
The 50GNWQ15-20-3 gives 20 m of head through a 50 mm outlet — a cutter pump for retrofits where the existing riser is narrow but the lift is tall. 15 m³/h, 3 kW.
| Flow Rate | 15m³/h |
|---|---|
| Head | 20m |
| Power | 3kW |
| Inlet / Outlet Diameter | 50mm |
| Material | Cast Iron,SS304 |
Retrofits come with a constraint new-builds don’t: the pipework is already in the wall. If a building was plumbed with a 50 mm sewage riser and the old pump has died, you need a replacement that fits that bore but still develops enough head to reach the top of the run — often a taller lift than the original ever handled well.
The 50GNWQ15-20-3 is made for that situation: a full 20 m of head at 15 m³/h from 3 kW, all through a 50 mm outlet. It lets you keep the existing riser instead of tearing open walls to fit a bigger line. And because it’s a cutter, it solves the reason the old pump probably failed — the 48 HRC alloy disc shreds the wipes and cloth that clog a narrow 50 mm pipe, while the 3Cr13 impeller holds the pressure to the top.
Replacing a pump in existing pipework? Send us the riser size and lift and we’ll confirm the fit — sales@haquanpump.com.
GNWQ Cutting Submersible Sewage PumpThe 50GNWQ20-15-2.2 is a 2.2 kW cutter sewage pump for factory canteens and staff kitchens — it handles the food waste, packaging and gloves that block canteen drain pits. 20 m³/h at 15 m head.
GNWQ Cutting Submersible Sewage PumpThe 80GNWQ35-15-3 is a 3 kW, 80 mm cutter sewage pump for basement car parks and podium drains — it clears the rags, debris and wash-down waste that block car-park sump pumps. 35 m³/h at 15 m head
GNWQ Cutting Submersible Sewage PumpThe 65GNWQ25-15-2.2 is a 2.2 kW, 65 mm cutter sewage pump for campgrounds, holiday parks and rest stops — built for the wipes and sanitary waste that fill seasonal ablution blocks. 25 m³/h at 15 m hea…
