Model: 50GNWQ10-10-0.75
The 50GNWQ10-10-0.75 is a compact 0.75 kW cast-iron cutter sewage pump with a 48 HRC alloy cutting disc. Runs on 220 V or 380 V — ideal for homes, shops and small basements.
| Flow Rate | 10m³/h |
|---|---|
| Head | 10m |
| Power | 0.75kW |
| Inlet / Outlet Diameter | 50mm |
| Material | Cast Iron,SS304 |
Not sure this pump fits your duty? Try the pump selector
Not every drainage problem needs a big pump. Sometimes it’s a single basement toilet, a small restaurant, or a villa where the sewer line sits higher than the fixtures. That’s exactly what the 50GNWQ10-10-0.75 is built for.
At 0.75 kW it moves 10 m³/h against a 10 m head through a 50 mm outlet — modest numbers, but the point isn’t power, it’s what it can pass. The 48 HRC alloy cutter disc at the base shreds wet wipes, tissue and hair before they ever reach the impeller, so a small pit doesn’t turn into a monthly unclogging job. Behind it sits a heat-treated 3Cr13 semi-open impeller — hard, wear-resistant and rust-free.
It’s one of the few models we offer in single-phase 220 V, so it runs off an ordinary domestic supply — no three-phase wiring needed.
One tip we always pass on: mount it about 25 cm off the pit bottom and keep stones and screws out, and the cutter will stay sharp for years. Need a compact cutter pump that just works? Contact sales@haquanpump.com.
The 100GNWQ100-25-15S is a precision-cast SS304 cutter sewage pump for chemical plants needing both corrosion resistance and a tall lift — 100 m³/h at 25 m head…
The 150GNWQ150-11-11S is a precision-cast SS304 cutter sewage pump for desalination plants and coastal works — high-volume, low-head handling of brine-laden eff…
The 100GNWQ100-20-11S is a precision-cast SS304 cutter sewage pump for large corrosive process duties — 100 m³/h at 20 m head, combining chemical resistance, vo…
