Model: 150GNWQ200-20-22
The 150GNWQ200-20-22 is a 22 kW, 150 mm cutter sewage pump for quarry, mine and heavy-sediment dewatering — 200 m³/h at 20 m head, with a wear-hardened path for abrasive slurry.
| Flow Rate | 200m³/h |
|---|---|
| Head | 20m |
| Power | 22kW |
| Inlet / Outlet Diameter | 150mm |
| Material | Cast Iron,SS304 |
Dewatering a quarry sump or a mine drainage point is punishing work: high volume, a real lift out of the pit, and water thick with abrasive sediment, silt and the fibrous debris that collects in any industrial sump. It chews through pumps that aren’t built for abrasion.
The 150GNWQ200-20-22 brings both muscle and wear resistance: 200 m³/h at 20 m head from a 22 kW motor through a 150 mm outlet. The 48 HRC alloy cutter clears the fibrous and plastic debris, while the heat-treated 3Cr13 impeller is chosen for exactly this kind of gritty, abrasive service.
One honest caveat for this duty: a cutter pump handles abrasive slurry and fibre, but it is not meant to ingest rock and large stone — those belong to a dedicated slurry or gravel pump. Keep hard oversize out with a screen, and this pump will give you volume, lift and a long wear life. Dewatering a site? sales@haquanpump.com.
GNWQ Cutter Submersible Sewage PumpThe 50GNWQ25-22-4 develops 22 m of head through a compact 50 mm outlet — a cutter pump for deep villa and small-building pits that push waste a long way up. 25 m³/h, 4 kW.
GNWQ Cutter Submersible Sewage PumpThe 200GNWQ250-15-18.5 moves 250 m³/h at 15 m head through a 200 mm outlet — an 18.5 kW cutter pump for ports, terminals and large industrial drainage.
GNWQ Cutter Submersible Sewage PumpThe 150GNWQ200-15-15 is a 15 kW, 150 mm cutter sewage pump for textile and garment-district lift stations — sized for high fibre-laden flow. 200 m³/h at 15 m head.
