Model: 200GNWQ300-15-22
At 300 m³/h the 200GNWQ300-15-22 is the largest GNWQ cutter sewage pump — a 22 kW, 200 mm workhorse for municipal pumping stations and large drainage.
| Flow Rate | 300m³/h |
|---|---|
| Head | 15m |
| Power | 22kW |
| Inlet / Outlet Diameter | 200mm |
| Material | Cast Iron,SS304 |
Not sure this pump fits your duty? Try the pump selector
When a municipal lift station or district drainage line has to move serious volume — and that flow carries everything a city sewer collects, from rags and wipes to plastic and textiles — you need size and a cutter that keeps up with both. The 200GNWQ300-15-22 sits at the top of the GNWQ range for exactly that.
It pushes up to 300 m³/h at 15 m head from a 22 kW motor through a 200 mm outlet. At that throughput even a good non-clog impeller still jams on the modern sewage stream — wet wipes being the notorious culprit. The GNWQ answer is to shred first: the 48 HRC alloy cutter reduces solids on intake so the large 3Cr13 impeller passes them cleanly.
It’s built to run hard — HT200/HT250 cast iron, heavy bearings, a mechanical seal rated for continuous duty — and the cutter disc is detachable for field service without pulling the whole pump.
Specifying a station pump? Send us your flow, head and the worst thing in your influent to sales@haquanpump.com.
The 100GNWQ100-25-15S is a precision-cast SS304 cutter sewage pump for chemical plants needing both corrosion resistance and a tall lift — 100 m³/h at 25 m head…
The 150GNWQ150-11-11S is a precision-cast SS304 cutter sewage pump for desalination plants and coastal works — high-volume, low-head handling of brine-laden eff…
The 100GNWQ100-20-11S is a precision-cast SS304 cutter sewage pump for large corrosive process duties — 100 m³/h at 20 m head, combining chemical resistance, vo…
