WILDEN XPS220 vs P220: 1″ Aluminum AODD Pumps Compared
The XPS220 is usually considered as an upgrade from the P220. So rather than repeat a spec sheet, here are the two side by side, using the PTFE builds 02-12965 (XPS220) and 02-11372 (P220).
| P220 | XPS220 | |
| Air system | Pro-Flo | Pro-Flo SHIFT |
| Max flow | 44 gpm (167 L/min) | 52 gpm (197 L/min) |
| Discharge | 3/4″ NPT | 1″ NPT |
| Air side | Polypropylene | Aluminum |
| Air inlet | 1/4″ FNPT | 1/2″ FNPT |
| Dry suction lift | 11.4 ft (3.5 m) | 17 ft (5.2 m) |
| Temperature (these builds) | 40 to 175 °F (4 to 79 °C) | 40 to 220 °F (4 to 104 °C) |
Two rows matter more than the others. The full 1 inch discharge means the XPS220 is not a drop-in replacement for a P220 with 3/4 inch pipework, so budget for an adapter. And the larger air inlet means the air line feeding it should be checked too.
On air use, Wilden’s example for the XPS220 is 22 gpm (83 L/min) against 2.8 bar (40 psig), taking about 36 Nm³/h (23 scfm) at 4.1 bar (60 psig) supply. If you send us your duty point, we will put both pumps’ curves next to each other so you can see what you would actually save.
Browse all 50 aluminum XPS220 builds: https://www.haquanpump.com/wilden-aodd-pumps/part-numbers?q=XPS220
Products in This Series
Genuine Wilden AODD Diaphragm Pumps & Spare PartsWILDEN 4″ Spare Parts: T20, PS20 and XPS20
Spare parts for 4″ WILDEN T20, PS20 and XPS20 iron pumps: what is listed under 20- numbers, and which 3″ air kits the 4″ pumps share.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsWILDEN 3″ Bolted Pump Parts: P1500, P1520 and P1530
Spare parts for bolted 3″ WILDEN pumps: P1500, PS1500, PX1500, the FIT P1520 and P1530, and H1500. Wet end kits, PTFE diaphragms, balls, manifolds and air kits.
Genuine Wilden AODD Diaphragm Pumps & Spare PartsWILDEN 3″ Clamped Pump Parts: P15, PS15 and PX15 by Air System
Which parts do 3″ clamped WILDEN P15, PS15, PX15 and T15 pumps share, and which depend on the air system? Diaphragms, balls, seats, kits and air parts.
Need a pump for your application?
Our engineers respond to technical inquiries within 24 hours.
Get a Quote