The details that decide how long a sewage pump lasts are easy to overlook on a spec sheet. GNWQ pumps are specified to survive: bolts and lifting rings in SUS304 stainless steel (not ordinary steel th…
| Flow Rate | 7 – 950m³/h |
|---|---|
| Head | 7-55m |
| Power | 0.75 – 90kW |
| Inlet / Outlet Diameter | 50 – 300mm |
| Material | Cast Iron,SS304 |
The details that decide how long a sewage pump lasts are easy to overlook on a spec sheet. GNWQ pumps are specified to survive: bolts and lifting rings in SUS304 stainless steel (not ordinary steel that rusts away in a wet pit), a built-in motor protection device, and a graphite–silicon-carbide mechanical seal.
Materials that hold up
• Cast iron HT200 casing and HT250 pump body for a rugged, stable structure
• SUS304 stainless bolts and lifting ring — no rusted-solid hardware at service time
• Graphite–SiC mechanical seal (joint-venture or imported seals optional)
• Built-in motor protection guards against overload and burnout
Applications: long-life municipal duty, corrosive farm effluent, continuous industrial wastewater, hard-to-service deep pits
HAQUANPUMP builds the full GNWQ cutter-pump range in-house. Send us your duty point and we’ll recommend the exact model, cutter disc and materials for the job.
GNWQ Cutting Submersible Sewage PumpTwo claims get made about a lot of sewage pumps: full head and no clogging. The GNWQ range actually delivers both. Its hydraulics are tuned so the pump reaches its rated head across the duty range — a…
GNWQ Cutting Submersible Sewage PumpOne practical advantage of the GNWQ design is its easy-remove cutter disc. Instead of scrapping the pump when the cutting parts wear, you simply swap the disc — and you can fit a different disc to sui…
GNWQ Cutting Submersible Sewage PumpA cutter pump is only as good as its blade. GNWQ pumps use a high-hardness alloy cutting head rated at Rockwell 48 HRC and above — noticeably harder than the ordinary steel found in many competing pum…
