Model: 80GNWQ35-12-2.2
The 80GNWQ35-12-2.2 opens the flow up to 35 m³/h through a larger DN80 outlet while keeping power at just 2.2 kW. It’s built for higher-volume transfer at modest head — moving a lot of fibrous sewage…
| Flow Rate | 7 – 950m³/h |
|---|---|
| Head | 7-55m |
| Power | 0.75 – 90kW |
| Inlet / Outlet Diameter | 50 – 300mm |
| Material | Cast iron, SS304,SS316 |
The 80GNWQ35-12-2.2 opens the flow up to 35 m³/h through a larger DN80 outlet while keeping power at just 2.2 kW. It’s built for higher-volume transfer at modest head — moving a lot of fibrous sewage without a big electricity bill.
| Model | 80GNWQ35-12-2.2 |
| Outlet | DN80 (3 in) |
| Max flow | 35 m³/h |
| Head | 12 m |
| Power | 2.2 kW |
| Voltage | 380 V (3-phase) |
| Cutter | Alloy spiral, ≥48 HRC |
The wider bore and cutter combination suit busy collection pits and farm effluent, where volume matters more than lift.
Applications: municipal collection pits, farm and livestock effluent, food-processing wastewater, building drainage, biogas-tank de-sludging
Fibrous, rag-laden or hard-to-pump sewage giving you trouble? The HAQUANPUMP engineering team will help you specify the right GNWQ cutter pump — reach out any time.
GNWQ Cutting Submersible Sewage PumpIf one GNWQ model earns the word “workhorse”, it’s the 65GNWQ25-15-2.2. A balanced 25 m³/h at 15 m through a DN65 outlet covers the bulk of everyday municipal and building duties, and at 2.2 kW it’s e…
GNWQ Cutting Submersible Sewage PumpWhen the discharge has to climb, the 50GNWQ15-20-3 delivers. It trades some flow for a strong 20 m head through a DN50 outlet, so it can push shredded sewage up several floors or along a long run with…
GNWQ Cutting Submersible Sewage PumpThe 50GNWQ10-10-0.75 is the entry point to the GNWQ cutter range — a compact, low-power submersible that still carries a hardened alloy cutter. It runs on ordinary single-phase 220 V, so it suits home…
