Model: 50GNWQ15-20-3
When the discharge has to climb, the 50GNWQ15-20-3 delivers. It trades some flow for a strong 20 m head through a DN50 outlet, so it can push shredded sewage up several floors or along a long run with…
| Flow Rate | 7 – 950m³/h |
|---|---|
| Head | 7-55m |
| Power | 0.75 – 90kW |
| Inlet / Outlet Diameter | 50 – 300mm |
| Material | Cast iron, SS304,SS316 |
When the discharge has to climb, the 50GNWQ15-20-3 delivers. It trades some flow for a strong 20 m head through a DN50 outlet, so it can push shredded sewage up several floors or along a long run without stalling — while its alloy cutter keeps fibre and rag from ever reaching the impeller
| Model | 50GNWQ15-20-3 |
| Outlet | DN50 (2 in) |
| Max flow | 15 m³/h |
| Head | 20 m |
| Power | 3 kW |
| Voltage | 380 V (3-phase) |
| Cutter | Alloy spiral, ≥48 HRC |
Use it where the pit is deep or the sewer connection is high above the pump — basement bathrooms in tall buildings, or a lift station feeding a raised main.
Applications: high-rise basement drainage, deep lift stations, long discharge runs, building sewage, septic transfer
Need the right GNWQ cutter pump for your flow, head and the waste you handle? Talk to the HAQUANPUMP team — your satisfaction is our greatest pursuit.
GNWQ Cutting Submersible Sewage PumpThe 80GNWQ35-12-2.2 opens the flow up to 35 m³/h through a larger DN80 outlet while keeping power at just 2.2 kW. It’s built for higher-volume transfer at modest head — moving a lot of fibrous sewage…
GNWQ Cutting Submersible Sewage PumpIf one GNWQ model earns the word “workhorse”, it’s the 65GNWQ25-15-2.2. A balanced 25 m³/h at 15 m through a DN65 outlet covers the bulk of everyday municipal and building duties, and at 2.2 kW it’s e…
GNWQ Cutting Submersible Sewage PumpThe 50GNWQ10-10-0.75 is the entry point to the GNWQ cutter range — a compact, low-power submersible that still carries a hardened alloy cutter. It runs on ordinary single-phase 220 V, so it suits home…
