Model: ISW horizontal pipeline pump, 7.5 kW; 50WQ submersible pump, 5.5 kW
Three horizontal ISW pipeline pumps at 7.5 kW and five 5.5 kW submersible pumps for a dust suppression system, 30 to 60 m³/h of fresh water.
| Flow Rate | 30 to 60 m³/h |
|---|---|
| Head | 20 m (ISW) and 30 m (submersible) |
| Power | 7.5 kW and 5.5 kW, 380 V |
| Material | Cast iron |
Not sure this pump fits your duty? Try the pump selector
Dust suppression systems spray water over yards, stockpiles and roads. This order supplied the pumps for one: horizontal pipeline pumps to feed the spray lines, and submersible pumps to lift water from the source.
| Pump | Duty | Motor | Qty |
|---|---|---|---|
| ISW horizontal pipeline pump | 30 to 60 m³/h, 20 m, fresh water | 7.5 kW, 380 V | 3 sets |
| 50WQ submersible pump | 30 to 60 m³/h, 30 m, fresh water | 5.5 kW, 380 V | 5 sets |
A pipeline pump is not self-priming. If the water source is below the pump, use a flooded suction, a foot valve, or a submersible pump to feed it, as this system did.
BlogHorizontal pipeline pumps built with a 316 stainless steel casing and a cast iron foot. Why you only need stainless where the liquid touches the pump.
BlogA 3.7 kW vertical inline pump, 25 m³/h at 32 m, ordered complete with counter flanges, bolts and a spare mechanical seal. Why that list is worth copying.
BlogIRG40-160A, 50-125(I) and 80-200A hot water pipeline pumps in one order with four 65WQK cutter pumps. Why one supplier for both made sense.
