¿Por qué sigue funcionando la bomba de mi pozo profundo?
Modelo: Deep well submersible pumps
Una bomba de pozo profundo que activa su protección le está diciendo algo. Las causas habituales, desde un bajo voltaje hasta una caída del nivel del agua, y cómo comprobarlas.
Presupuesto
Tasa de flujo
2 to 50 m³/h (QJ range)
Cabeza
Up to 450 m (QJ range)
Fuerza
0.75 to 45 kW, three-phase submersible motor
Diámetro de entrada/salida
For wells of 100 to 200 mm (4 to 8 inch); outlet 40 to 80 mm
Los disparos repetidos son una de las señales de advertencia de que una bomba de pozo profundo debe detenerse y revisarse. Reiniciar y reiniciar una y otra vez acorta la vida útil del motor. Resuelva estas causas.
What you see
Likely cause
What to check
Trips soon after starting, current high
Low or unbalanced supply voltage
Voltage on all three phases at the panel, with the pump running
Trips after running a while
Water level falling to the pump inlet
Dynamic level; the inlet must stay at least 1 m below it
Current high, flow normal or high
Pump running at too low a head (beyond its curve)
Partly close the outlet valve and watch the current
Current high, flow low, noise
Worn or sand-jammed impellers
Lift and inspect the pump
Earth leakage trip
Damaged cable or a failed cable joint
Insulation resistance; below 0.5 MΩ means stop
Trips at once on every start
Cable too thin or too long for the motor
Cable size against the motor current and length
Anota el voltaje, la corriente y el flujo cada vez que se dispara. Si la causa no está clara envíanos esas cifras con el modelo de bomba y te ayudaremos a leerlas.
El tubo ascendente transporta el agua y cuelga la bomba. Cómo elegir entre un elevador de acero, plástico y flexible para una bomba sumergible de pozo profundo.
Las bombas para pozos profundos, las bombas sumergibles de gran altura y las bombas de flujo axial cubren trabajos muy diferentes. Una breve guía para elegir por caudal, altura y fuente de agua.
Cómo dimensionar una bomba de fuente: por qué la altura del chorro no es el cabezal de la bomba, cómo las boquillas cambian el flujo y cómo dividir una fuente entre varias bombas.